3 AWG Gauge Stranded Copper Building Wire THHN / THWN-2 – 600 Volt UL Listed Cut To Length – Black
$1.95
Sold by the FOOT – Enter desired length in the quantity box.
#3 THHN/THWN-2 Wire
Cut to length – sold by the foot. Enter the desired footage in the QTY box.
Minimum 1′ to maximum 5000′. Please call for longer put ups.
Applications:
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). Type THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90ºC or not to exceed 75ºC in oil or coolants. Applications requiring Type MTW conductor is appropriate for use in dry locations at 90ºC, or not to exceed 60ºC in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105ºC in dry locations.
Also Known As:
Copper wire, THWN, building wire, hook up wire, conduit wire, bathtub wire, lighting wire, nylon copper wire, construction cable, etc…
Features:
Nylon outer jacket for easy pulling. VW-1 rated 14 AWG – 8 AWG. All sizes are rated gasoline and oil-resistant II.
Jacket:
A tough, polyamide, Nylon outer covering per UL-1063 and UL-83.
Standards:
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
Canadian Standards Association C22.2 No. 75
NEMA WC70/ICEA S-95-658
Institute of Electrical and Electronics Engineers
Construction:
Conductors:
Solid, uncoated copper conductors per ASTM-B3
Stranded, uncoated copper conductors per ASTM-B3, ASTM-B787 and ASTM-B8
Insulation:
Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-8
3 AWG THHN/THWN-2 Specifications*:
| Size: | 3 AWG |
| Number of Strands: | 19 |
| Cross Section Area: | 26.7 mm2 |
| PVC Insulation Thickness (Conductor): | 1.020 mm / 0.040 inches |
| Nylon Jacket Thickness: | 0.150 mm / 0.006 inches |
| Outside Diameter: | 8.74 mm / 0.344 inches |
| Weight: | 0.202 lbs per ft |
| Allowable Ampacity: | 85 Amps at 60ºC / 100 Amps at 75ºC / 110 Amps at 90ºC |
*Data provided on this page is subject to change based on different manufacturers variances.
Be the first to review “3 AWG Gauge Stranded Copper Building Wire THHN / THWN-2 – 600 Volt UL Listed Cut To Length – Black” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.